Home / Products
Zelmik product portfolio

Rubber & Plastic Materials.

Explore our range of industrial elastomers, rubber sheets, foam, strips and engineering plastic semi-finished products. Select a material below to view product details and specification considerations.

Browse by material

One range. Multiple material options.

Product formats and technical properties depend on compound, grade and manufacturing requirements. Send us your target specification for confirmation.

AI-generated studio product photograph of black neoprene rubber rolls and sheet
Synthetic elastomer · CR

Neoprene / Chloroprene Rubber

Chloroprene rubber (CR), commonly known as Neoprene, is a versatile synthetic elastomer used in industrial sealing, cushioning, protection and general-purpose fabrication. Depending on formulation, it offers a useful balance of weathering, ozone, abrasion and moderate oil resistance.

Supplied in sheet, strip, slab and foam formats according to grade and application requirements.

MaterialCR / Chloroprene
Typical colourBlack (other colours by grade)
HardnessCommon grades around 40–70 Shore A
ApplicationsGaskets, seals, pads, wear strips

Indicative sheet sizes

Reference formats: approx. 0.5–25 mm thickness · 1.4 m width · roll lengths commonly 5–20 m, depending on thickness and grade. Thicker slab formats may also be available by specification.

ENQUIRE ABOUT NEOPRENE →
AI-generated studio product photograph of EPDM rubber sheet roll
Synthetic elastomer

EPDM Rubber

EPDM is widely selected for outdoor and weather-exposed applications due to its strong resistance to ozone, UV, ageing and water. It is commonly used for external seals, gaskets, roofing-related components and general industrial protection.

MaterialEPDM
Typical colourBlack; other grades vary
HardnessCommon grades around 50–70 Shore A
ApplicationsWeather seals, gaskets, outdoor use

Indicative sheet sizes

Reference formats include approx. 1.5–25 mm thickness and 1.4 m width, with roll lengths commonly 5–10 m depending on thickness. Other grades and dimensions require confirmation.

ENQUIRE ABOUT EPDM →
AI-generated studio product photograph of black NBR nitrile rubber sheet
Oil-resistant elastomer

NBR / Nitrile Rubber

Nitrile butadiene rubber (NBR) is commonly chosen for applications involving contact with oils, greases, fuels and related industrial fluids. The suitability of a specific grade depends on the fluid, temperature, exposure time and mechanical demands.

MaterialNBR
Typical colourBlack
HardnessGrade dependent
ApplicationsOil seals, gaskets, mats, linings

Available formats

Rubber sheeting, rolls, strips and cut components may be specified by thickness, width, length and hardness. Please confirm the required dimensions and media compatibility with our team.

ENQUIRE ABOUT NBR →
AI-generated studio product photograph of textured SBR rubber sheet
General-purpose elastomer

SBR Rubber

Styrene-butadiene rubber (SBR) is a cost-effective general-purpose synthetic rubber used in a variety of industrial products. It is often selected for abrasion resistance, resilience and general mechanical applications where exposure conditions are suitable.

MaterialSBR
Typical colourUsually black
HardnessGrade dependent
ApplicationsFlooring, pads, seals, general fabrication

Available formats

Sheet, roll and strip formats can be discussed. Thickness, width, roll length, surface finish and compound should be confirmed against the intended use.

ENQUIRE ABOUT SBR →
AI-generated studio product photograph of translucent silicone rubber sheet
Specialty elastomer

Silicone Rubber

Silicone rubber is valued for flexibility across a wide operating temperature range and good resistance to weathering, UV and ozone. Depending on grade, it is used for seals, gaskets, insulation, food-contact-related applications and specialist industrial components.

MaterialSilicone (VMQ)
Typical coloursTranslucent, red, white and others
HardnessGrade dependent
ApplicationsSeals, gaskets, insulation

Available formats

Sheets, strips, sponge profiles and custom-cut forms. Thickness, width, hardness, colour and temperature requirements should be specified per application.

ENQUIRE ABOUT SILICONE →
AI-generated studio product photograph of layered black rubber foam sheets
Cellular rubber

Rubber Foam & Sponge

Rubber foam and sponge materials provide compressibility and cushioning for sealing, insulation, vibration control and gap-filling applications. Available properties vary between open-cell and closed-cell structures and by polymer type.

Material optionsEPDM, Neoprene, NBR, Silicone
Cell structureOpen-cell or closed-cell
FormatsSheets, rolls, strips, profiles
ApplicationsSealing, insulation, cushioning

Custom specification

Please advise density, thickness, width, length, cell structure, hardness and whether adhesive backing is required.

ENQUIRE ABOUT RUBBER FOAM →
AI-generated studio product photograph of rubber sheeting rolls and flat sheets
Industrial sheet materials

Rubber Sheets & Rolls

Zelmik's rubber sheet category covers a range of elastomer compounds for lining, sealing, protection, fabrication and general industrial use. Material selection should take account of the working environment, temperature, media exposure, hardness and mechanical loading.

Compound optionsCR, EPDM, NBR, SBR, Silicone
Supply formsRolls, cut sheets, slabs
ThicknessGrade and compound dependent
SurfaceSmooth or specified finish

Typical specification fields

Thickness × width × length · Shore A hardness · colour · compound · surface finish · reinforcement (if required). Custom sizes are subject to technical review and order quantity.

ENQUIRE ABOUT RUBBER SHEETS →
AI-generated studio product photograph of black rubber strips and extruded profiles
Strips & profiles

Rubber Strips & Profiles

Rubber strips and profiles are used for gap filling, sealing, cushioning, anti-chafing and protective applications. Solid and sponge options can be considered in several elastomer compounds to suit the operating environment.

Compound optionsEPDM, Neoprene, NBR, Silicone
Profile typesSolid, sponge, rectangular, custom
DimensionsWidth × thickness × length
OptionsAdhesive backing by specification

Indicative strip dimensions

Some specialist sponge strip ranges are offered in widths around 5–100 mm and thicknesses around 1.5–15 mm, with 10 m lengths as a reference format. Actual Zelmik options require confirmation.

ENQUIRE ABOUT RUBBER STRIPS →
AI-generated studio product photograph of engineering plastic sheets and rods
Engineering plastics

Plastic Sheets & Rods

Industrial plastic semi-finished products are used in machining, fabrication, wear components, guides, spacers and general engineering applications. Polymer selection depends on load, friction, temperature, chemical exposure and dimensional requirements.

Product formsSheets, rods, bars
Polymer optionsConfirm available grades
DimensionsThickness / diameter / length
ApplicationsMachined parts, wear components

Custom specification

Please provide polymer type (if known), sheet thickness or rod diameter, length, colour, tolerance and intended application for a suitable material review.

ENQUIRE ABOUT PLASTICS →

Have a material specification or drawing?

Send us your dimensions, operating conditions and target quantity for review.

REQUEST PRODUCT INFORMATION ↗

Specification note: Product descriptions and indicative size examples on this page are general technical guidance based on common industry formats and publicly available reference product literature. They are not a confirmation of Zelmik stock, manufacturing capability, certification or guaranteed tolerances. Final specifications, availability and suitability must be confirmed by Zelmik in writing before order.